Knowledge of carbon steel pipe bend

Author : admin

Update time : 2021-10-11 17:31:19

After the manufacturing of carbon steel bend, it must be 100% sealed and handled carefully. The passivated stainless steel curved surface needs to be wrapped with three layers of canvas to strengthen protection. The temporary accessories and supports of stainless steel elbow are made of stainless steel.
If heavy or bending tools are used, the protective plates must be installed at the position that may contact stainless steel to protect them. These protective plates must be made of stainless steel or lead plate. When transporting stainless steel bends, they must be placed in a closed box, the open box must be covered with canvas, and the end of the pipe must be blocked with plastic, Stainless steel bends shall not be affected by carbon steel and other impurities. They shall be stored in a dry room as far as possible to avoid the combination of moisture, dust, iron and other pollutants.
The above are the problems that should be paid attention to during the storage of stainless steel bends. Let's take a look at the advantages of stainless steel bends. The stainless steel bends are mirror polished. The products are connected by seamless welding technology, and the welds are flat, which can meet the strict requirements of customers for wire drawing and bending. Compared with round pipes, stainless steel bends usually have large moment of inertia and section modulus, It has strong bending and torsional strength, which can greatly reduce the structural weight and save steel.

Previous : Specification for carbon steel flanges

Next : Influence of lubrication on product quality during forming of carbon steel bend

DIN 2635 PN40 Welding Neck Flange Dimensions

May .26.2026

Dimension and weight of DIN2635 PN40 Welding Neck Flange

DIN 2634 PN25 Welding Neck Flange

May .14.2026

DIN 2634 PN 25 Weld Neck Flanges are generally used in high pressure applications, where hot or cold temperatures exist.

DIN 2633 PN16 Welding Neck Flange

May .12.2026

DIN 2633 PN16 Welding Neck Flange

DIN 2632 PN10 Welding Neck/WN Flange Dimensions

May .07.2026

DIN 2632 PN 10 Weld Neck Flanges are generally used in high pressure applications, where hot or cold temperatures exist. These steel DIN 2632 weld neck flanges are circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography.